Bexxon Global

Thermal Spray produces smoke, dust, noise, sound, and gases.  In your job shop, you need the proper equipment to handle the spray process, which is sealed from the dust created by HVAF, HVOF, arc spray, wire flame spray, plasma spray etc.  Bexxon Global can custom designed for your location, and application.

Spray Lathe: (rotating the part during spraying and blasting)

  • Spray lathe capacity: 3 up to 10 tons, 6-10 meters long, diameter 55 mm up to 1000 mm
  • Spray lathe rotation:  Mitsubishi servo motor
  • Max rotation speed RPM: based on parts’ Diameter 55 mm up to 1000 mm 
  • Lathe: chuck on each lathe head, with spring inside the chuck box to absorb expansion
  • An XY traverse for gun manipulation on a track parallel to the lathe, integrating a suction accordion hood under the roll part, sucks the dust created by the spraying by moving together with the gun manipulator above.
  • Thermal spray Gun Travel speed controlled by a Mitsubishi servo motor.
  • Touch screen: MMI will be used as the control panel for both lathe and XY traverse operation. RPM of lathe, moving speed of traverse and travel round times can be set on the touch screen and the screen can show the travel round times after the system started.
  • PLC for controlling, and interfaced with HVAF machine with E-stop 
  • Manual adjustment of height and the location of the gun.
  • Thermal Spray lathe and traverse can be mounted on wheels and / or can be fixed by anchors.
HVAF Spray lathe


Bexxon Global provides acoustic enclosures (Thermal Spray booths for HVOF, HVAF, Plasma Spray, which help contain dust and noise generated by your thermal spray operations.  They can be completely customized to accommodate your specific needs. 

  •  viewing windows 
  • double-leaf access door or sliding overhead doors
  • Inlet silencers 
  • custom colors available 

​Each thermal spray booth is a structure designed to reduce the high noise levels of thermal spray to an acceptable 85 dBA (or to match your corporate or country's standards. The thermal spray booths are assembled from panels and beams, making their design highly flexible. Designed for superior noise absorption, the panels feature a high-quality acoustical fill and perforated steel inner surfaces. The modular design of the rooms allows for minimal assembly time and easy relocation. 

All thermal spray processes generate dust. A properly sized dust control system is required for collection of this over-sprayed material. The make-up air entering the acoustic room requires an air inlet silencer designed for the dust collector′ s air volume. These air inlet silencers are designed for reverse flow, which occurs when sound waves and air travel in opposing directions.

Please contact Bexxon Global for custom design specs and recommendations for your specific thermal spray operations, for HVAF, HVOF, Plasma Spray.

Spray booth and Spray Lathes

Acoustical enclosures and rotating devices for HVOF